[ARC5] Screws
Todd Bigelow - PS
[email protected]
Thu, 07 Mar 2002 10:52:50 -0500
Hi Jay -
This is yet another good reason to pick up a few junker sets - a lot of spare
screws!
As far as the 'headless screws', I've removed a couple with a small pair of
cutting pliers when there was enough left sticking out to grab ahold of. Usually
the body of the screw is sticking out the other end of the retainer even if it's
flush with the top. Cross-threading is one possibility, overtightening is
perhaps another. If there are indications of an impact, perhaps the head was
sheared off.
Hope this helps -
de Todd/'Boomer' KA1KAQ