[AMRadio] Enameled wire cleaning

[Randy Berry]

I haven't had any luck with that at all. Usually for me that results
in a bad solder joint if any joint at all. I just use a bit if fine
sandpaper, it doesn't really matter, sandpaper will work really. That
leaves you with a nice clean surface to tin and solder to.

On Fri, Dec 21, 2018 at 5:34 PM CL in NC via AMRadio
<amradio at mailman.qth.net> wrote:
>
> I've had great luck with just getting a blob of solder on the iron or gun tip, with the enameled wire in it, move it back and forth over the area you want clean, keeping a sufficient amount of solder flowing so that the wire in inside the blob, and the molten solder will burn the enamel off and leave it tinned at the same time.
>
> Charlie, W4MEC in NC
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Archives: http://mailman.qth.net/pipermail/amradio/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to randyn3lrx at gmail.com



-- 
tnx es 73 de Randy, N3LRX/8
https://n3lrx.com