[AMRadio] Viking Ranger plug

[David Knepper]

Get a standard HC-6U crystal.  Remove the shell case and drill a small hole 
for the AC cord in the holder.  Resolder the shell and that is all there is 
to it.

David Knepper, W3CRA/W3ST
Collins Radio Association - Join Today
www.collinsra.com
Editor of the Collins Journal
Secretary of the Collins Radio Association
See us on Facebook:  Collins Radio Association

----- Original Message ----- 
From: "Rsauvan" <rsauvan at beyondbb.com>
To: "AMRadio" <AMRadio at mailman.qth.net>
Sent: Friday, February 01, 2013 8:12 PM
Subject: [AMRadio] Viking Ranger plug


> Hi all,
> I am looking for the 2 prong plug that goes in the back of the Ranger 
> where it supplies the 110 volts to accuate a relay for antenna switching.
> Im sure they are hard to find if not impossible to find and if so, what 
> can I use? It almost looks like a crystal receptacle but I dont have a 
> crystal
> to try and see if it fits. If I did, I might be able to fabricate a plug 
> from a crystal case. Does anyone know of a source, or have a spare they 
> are williing
> to part with, or any ideas on how to fabricate one so I can get my Dow Key 
> relay working?
>
> Thanks-Bob-W0YBS
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html