[AMRadio] Switching ladder line...

[Harold Smith]

Get two rotary switches with contacts for  #no of antennas desired,like 5 
antennas would be single pole 5 position rotary switch  stack two on one 
shaft ,one sw for line 1 another for line 2 .....GL  W4PQW
----- Original Message ----- 
From: "Rick" <rickb at tx.rr.com>
To: <amradio at mailman.qth.net>
Sent: Friday, March 11, 2011 2:10 PM
Subject: [AMRadio] Switching ladder line...


> I'm looking for suggestions on how to switch ladder line between three or
> four different rigs without having to unhook it. I would like a
> configuration similar to a four pole coax antenna switch, but using ladder
> line. I've thought of using knife switches, but would like to hear how
> others have accomplished this. I'd like to run ladder line directly to 
> each
> balanced tuner of each rig. Is anyone doing this and if so, how?
>
>
>
> Thanks,
>
> Rick/K5IAR
>
>
>
> ______________________________________________________________
> Our Main Website: http://www.amfone.net
> AMRadio mailing list
> Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/
> List Rules (must read!): http://w5ami.net/amradiofaq.html
> List Home: http://mailman.qth.net/mailman/listinfo/amradio
> Post: AMRadio at mailman.qth.net
> To unsubscribe, send an email to amradio-request at mailman.qth.net with
> the word unsubscribe in the message body.
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html