[AMRadio] Collins 32V1 diagram needed...

[Vince Werber]

TNX for the info...

note the differences with my 300 series 32V1...

Vince
ka1iic
-.--.

On Fri, 5 Apr 2002, Brett Gazdzinski wrote:

> Vince,
> I used to have a 32v1, and the differences between it and
> the later models were...
>
> The 32v1 had a cw sidetone circuit,

Yes, mine has that...

> The 32v1 had a door in the top with a HV interlock switch,

Yes mine has that also...

> The coarse loading was under the door,

Mine has this feature one the front panel... incorperated with
the 'ANT. LOADING' control/

> No tune switch on the 32v1?

Mine has the tune switch...

> The 32v1 had 4 electrolytic caps, the later models had
> an oil filled cap replacing 2 of the electrolytics,

Mine has the round electrolytics....

> No handles on the front of the 32v1,

Mine has no handles...

> Slightly different meters.

I don't know about this....

>
> My 32v1 was a good rig, but I sold it because the coarse
> loading was a pain, it could not be mounted in a rack,
> or anything placed on top of the rig.
>
> I got it for $40.00 and sold it to a local guy about a year ago
> for $200.00....
>
> Brett
> N2DTS
>
>
> >
> >
> > Hi Todd all others...
> >
> > I downloaded a copy of the V3 diagram and have compared it to
> > my V1 and there isn't much 'electrical' difference between the
> > two...  biggest thing I see is the types of filter caps in the
> > HV section... no biggie...  The V1 doesn't have the 'handles' on
> > the front either
> >
> > The V1 has NO RF shielding but that isn't a problem here because
> > I am far enough away from neighbors...  I'm fact I haven't had
> > any problems in house...  weird ehhh?
> >
> > I think this V1 was during the 'transition' period between the
> > V1 and V2...  the series number is in the 300 region...
> >
> > I've listened for years and I don't remember of ever hearing a
> > V1 on the air... there must be some out there... right?
> >
> > I did Tim's (WA1HLR's) mod to the audio but ran into problems
> > with the negative feedback line...  I know it's me... I screwed
> > it up... It works but I had to disconnect the feedback...  It
> > should be straight forward and I feel foolish... but... 80)
> >
> > Now to pull it out of the case... uggghhhh...  again!
> >
> > Thanks all
> > Vince
> > ka1iic
> > -.--.
>
> _______________________________________________
> AMRadio mailing list
> AMRadio at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/amradio
>