[Alinco] 610TQ Won't Drop Repeater

[Esterson/Pinsky]

Try closing (tightening) the squelch on the link (ie. UHF)side of the 610,
or even better, use PL decode and transmit the correct PL from your handi.
If this doesn't help, in some very rare situations, the output frequency of
your 610 ( i.e. the input to the repeater,) can mix with some other local
frequency and a harmonic of this may happen to be on the input frequency
you chose for UHF - if this is the case, try moving the UHF input frequency.

Hope this helps 
-Avi 4X6UA

At 18:10 17-02-02 -0500, Harold wrote:
>Hello and thanks for reading.  My 610TQ won't drop the repeater in the
cross band repeat mode.  I transmit on UHF, my 610 retransmits on 2 meters.
 The repeater receives o.k. but ending my transmission doesn't drop the
repeater; the repeater hangs 'open'.  Since I am doing this from home I can
walk into the next room and turn the 610 off causing the repeater to drop
but this defeats the purpose of cross band repeater.
>
>Any help at solving this problem would be appreciated.
>
>73,
>Harold
>
>_______________________________________________
>Alinco mailing list
>Alinco@mailman.qth.net
>http://mailman.qth.net/mailman/listinfo/alinco
>