[AK-VHF] QRV on 927.5 FM

Edward R Cole kl7uw at acsalaska.net
Tue Oct 15 03:15:12 EDT 2013


At 08:57 PM 10/13/2013, Edward R Cole wrote:
>I finished installing my 900 MHz system and tested it., today.
>
>The radio problem was due to "pilot error" plugging the mic 
>connector in backward.  I have 14w into a load and 13w indicated 
>into the antenna with 2:1 SWR.  I measured 5.6w at the tower so 
>guess 5w at the antenna.  Preamp (0.26 dBNF - 22 dB gain) is working 
>and sma transfer relay is being used to bypass it.  The major work 
>was modifying the DEMI sequencer to control the two relays and 
>preamp so nothing got hurt.  I broke out the mic PTT line to control 
>the sequencer and then looped out of the TX2 stage to key the radio 
>into Tx.  The radio (GE TMX-915) is located in the shack so lots of 
>loss getting RF to the eme tower top where the 18.5 dBi 33-element 
>loop-yagi lives (vertical pol.) at 52-feet.
>
>I am still working on my 2m system and testing so will be another 
>day until the system is raised on the tower.  I should be ready to 
>try 927.5 on the Tuesday Net.  Not sure how far 5w will reach (maybe 
>only KL7XJ 15mi south of me).  I have a 150w MOT amplifier with some 
>burned PS components that eventually will provide lots of power 
>located at tower top.
>
>My 1296-eme system is QRV on the 16-foot dish with 50w and I will 
>begin testing on the Moon middle of the week when the Moon is higher.
>
>73, Ed - KL7UW
>http://www.kl7uw.com
>dubususa at gmail.com
>"Kits made by KL7UW"

Finished testing the 2m system and the 1296 system and have the array 
raised back up.
2m: 4x M2-2mXP20 yagis for 21.3 dBi gain + 150w  (0.1 dBNF preamp)
33cm: 33-element loop-yagi with 18.5 dBi gain + 5w (0.26 dBNF preamp)
23cm: 45-element loop-yagi with 20 dBi gain + 6w (0.30 dBNF preamp)

also:
6m: 3-element yagi pointed SE + 125w (working on tower for 6-element 
rotatable yagi)
223.50 FM: 2x CC 220-11 yagis 12-dBi gain + 60w (0.7 dBNF preamp)
146.52 FM: 11-element yagi 13 dBi gain + 15w or 130w (0.5 dBNF preamp)

432 has some problems so not QRV.  Maybe get it fixed during the day, 
tomorrow: 11-element yagi + 20w (0.7 dBNF preamp)


73, Ed - KL7UW
http://www.kl7uw.com
dubususa at gmail.com
"Kits made by KL7UW" 



More information about the ak-vhf mailing list