[ADXA] A3 and 3D2CR

[Scott Branyan]

Greetings all,
 
Had to get up at 1:30 am (local) this morning. Checked the radio and Masa
(A35JP) on Tonga was working 40m FT8. After just a bit he posted QSY to FT4,
so I switched to 7.0475 and callers (mostly JA) were already lined up. Took
me a good 20-30 minutes to find a break from the JAs and he became lonely
and came back to me, hi. In the log, and he confirmed on LOTW later this
morning. 
 
I checked the spots and saw 3D2CR but passed it off as Figi. This morning
after sunup, I took the time to check the call and saw that Masa had gone on
the air from Conway Reef! He came back to me with a -12, but 40m was already
fading and the signal strength was not there to complete a call. Check his
QRZ page for a list of modes and frequencies he will be using. He has a
strong station and should be fairly easy to pick up, especially if you can
work 17m. 
 
73,
Scott/W5AAJ
 
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/adxa/attachments/20210919/188373aa/attachment-0001.html>