[ACARS] ACARS listening -HELP-
Sam 2672
[email protected]
Thu, 23 Oct 2003 13:06:45 +0300
Hello Carlos
from the equipment you have, I would use only the following:
>SONY ICF-SC1 Scanner
>WATSON WRP-125 preamplifier (Airband)
>RADIO SHACK telescopic antenna
And only if you start suffering from intermod or other interference, would I
add the ABF125. I would place it between the antenna and the amplifier, just
to avoid some strong interfering signals to enter your amplifier.
The tuneable receiver filter is unnecessary and it only adds some
attenuation. You can tune your telescopic antenna itself instead.
With Regards,
Sam
>From: "Carlos Abreu" <[email protected]>
>Reply-To: [email protected]
>To: <[email protected]>
>Subject: [ACARS] ACARS listening -HELP-
>Date: Thu, 23 Oct 2003 10:31:29 +0100
>
>Hi to all
>
>I need some help from you, I have the following equipment conected 24H per
>day to listen ACARS:
>
>SONY ICF-SC1 Scanner
>RADIO SHACK telescopic antenna
>WATSON WRP-125 preamplifier (Airband)
>WATSON WAF-125 tuneable receiver filter
>AOR ABF125 filter (Airband)
>
>TOSHIBA SATELLITE 4070 CDT notebook
>SKYSPY software
>AIRNAV Suite 4 software
>
>All cable BNC conections are with RG58U and 3.5mm conections are with
>blindage cable
>
>The listening equipment is 4 meters away from PC to avoid interefernces
>
>I live in a high building near Lisbon International Airport (LPPT/LIS),
>less
>than 10 Kms, you can see my logs at
>http://www.acarsonline.co.uk/Logs/corres/portugal/lisbon/
>
>However due to building internal rules I can't use an external antenna, so
>I
>listen to ACARS with the best possible internal solution.
>I have tried several combinations between equipment but when meteo
>conditions aren't good enough for VHF signals I loose a lot of uplink data,
>I'm sure that a small detail can make a big difference in good reception,
>this is the main reason why I ask your comment in order to help me improve
>the ACARS reception.
>
>The equipment sequence I use is the following:
>
>Antena > Preamplier > Filter > tuneable receiver filter > scanner
>
>Questions:
>
>1) Is this the correct sequence to turn the equipment ?
>
>2) I must use just one filter or I can use both ?
>
>Many thanks in advance and best regards.
>
>Carlos
>
>
>
>
>
>
>
>
>_____________________________________________
>Acars info and Aircraft ID answers go to: http://www.acarsonline.co.uk
>[email protected]
>http://mailman.qth.net/mailman/listinfo/acars
_________________________________________________________________
The new MSN 8: advanced junk mail protection and 2 months FREE*
http://join.msn.com/?page=features/junkmail