[600MRG] How to QSY UP in SlowJT9-2
Andy - KU4XR
ku4xr at yahoo.com
Fri Feb 8 10:23:11 EST 2019
Good day all:
Good copy from W0YSE here in TN. in SlowJT9 -2 mode: 73 to all: - Andy KU4XR
19-02-08 00:44 0544 -29 0.9 1701 2 H3LLO W0YSE CN85
19-02-08 01:28 0628 -29 0.9 1700 2 H3LLO W0YSE CN85
19-02-08 02:28 0728 -24 0.9 1699 2 H3LLO W0YSE CN85
19-02-08 02:48 0748 -25 1.0 1699 2 H3LLO W0YSE CN85
19-02-08 03:00 0800 -30 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 03:16 0816 -26 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 03:24 0824 -31 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 03:28 0828 -26 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 03:36 0836 -23 0.9 1698 2 H3LLO W0YSE CN85
19-02-08 03:48 0848 -29 1.0 1699 2 H3LLO W0YSE CN85
19-02-08 03:56 0856 -25 1.0 1700 2 H3LLO W0YSE CN85
19-02-08 04:04 0904 -27 1.0 1700 2 H3LLO W0YSE CN85
19-02-08 04:08 0908 -30 0.9 1699 2 H3LLO W0YSE CN85
19-02-08 04:40 0940 -27 1.0 1699 2 H3LLO W0YSE CN85
19-02-08 04:56 0956 -28 0.9 1699 2 H3LLO W0YSE CN85
19-02-08 05:00 1000 -22 1.0 1699 2 H3LLO W0YSE CN85
19-02-08 05:04 1004 -26 0.9 1699 2 H3LLO W0YSE CN85
19-02-08 05:08 1008 -26 1.0 1699 2 H3LLO W0YSE CN85
19-02-08 05:20 1020 -30 0.9 1698 2 H3LLO W0YSE CN85
19-02-08 05:24 1024 -29 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 05:28 1028 -22 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 05:32 1032 -29 0.8 1698 2 H3LLO W0YSE CN85
19-02-08 05:44 1044 -27 0.9 1698 2 H3LLO W0YSE CN85
19-02-08 05:48 1048 -28 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 05:52 1052 -27 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 05:56 1056 -26 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 06:00 1100 -29 1.0 1698 2 H3LLO W0YSE CN85
19-02-08 06:04 1104 -24 0.9 1698 2 H3LLO W0YSE CN85
19-02-08 06:08 1108 -25 1.1 1698 2 H3LLO W0YSE CN85
19-02-08 06:12 1112 -28 1.0 1699 2 H3LLO W0YSE CN85
--------------------------------------------
On Thu, 2/7/19, Neil Klagge <w0yse at msn.com> wrote:
How to QSY UP in SlowJT9-2
Tonight I will be trying JT9-2 above the WSPR band on
630m.
I plan to be at 1700 Hz on the waterfall using SlowJT9 v0.9.15.0
To be able to see my signal on the waterfall, you would need
to find the Right Arrow ‘>’on the spectrum at the end
of the frequency scale. Click on that repeatedly until you
are able to see above 1700.
Also, to prepare the program to TX and RX there, you might
need to check the boxes in the MODE box that extend the
freq range for RX and TX.
Make sure you have 474200 entered into the DIAL box, and
PSKreporter enabled under SETTINGS
so we can see you on the PSKreporter map for the
'600m' band selection.
Hope to 'see' you there,
Thanks &
73
Neil, w0yse,
CN85rq
Vancouver,
WA
My
ham radio
website:
http://w0yse.webs.com/
My
Faith
website:
http://neilsfaith.webs.com/
More information about the 600MRG
mailing list