[600MRG] Need recommendation for anti-corrosion bonding for dissimilar metals

[cactuscharlie at reagan.com]

Andy,NAPA sell two kinds of anticorrosion products.  The come in an aluminum based mix, and a copper based mix.  I use mostly the copper mix, but the Al mix is great for telescoping antenna elements.  The stuff is conductive, which is what you want.
Also, wear rubber gloves with the copper mix.  The copper particles are microscopic, and if you get it on your fingers,  it takes a LOT of scrubbing to get it off.
I've had both tubes 5 years plus.  A little goes a very long way.  It is also good for the bearings and wipers in air variable caps.  Just don't bridge the stator and vanes.73,Chuck,AC7GZ
Sent from my Verizon LG Smartphone
------ Original message------From: Andy - KU4XR via 600MRG <600mrg at mailman.qth.net>Date: Tue, Sep 25, 2018 5:30 PMTo: 1750 Meter lowfer list;600 meter group;Cc: Subject:[600MRG] Need recommendation for anti-corrosion bonding for dissimilar metals
Hi all:

What can be used ( and purchased at home repair store, etc ) to hold off corrosion when bonding galvanized,
aluminum, or stainless steel to copper ?? ( my ground rod specifically ) .. The white - powdery corrosion sets in
very quickly.. Thanks for suggestions:

73:

Andy - KU4XR
______________________________________________________________
600MRG mailing list
Home: http://mailman.qth.net/mailman/listinfo/600mrg
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:600MRG at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180925/c9d08d10/attachment.html>