[600MRG] Don't scrimp on the shack grounding

[jrusgrove at comcast.net]

Andy

Placing the loading coil outside at the central point of the antenna ground 
radial system would have likely made two days of 'in shack' grounding work 
unnecessary. 

Jay W1VD  



----- Original Message -----
From: Andy - KU4XR via 600MRG <600mrg at mailman.qth.net>
Reply-To: Andy - KU4XR <ku4xr at yahoo.com>
To: 600 meter group <600mrg at mailman.qth.net>
Sent: 3/18/2018 4:01:59 PM
Subject: Re: [600MRG] 
Don't scrimp on the shack grounding


Hi Jay:

Yes I did . Spur of the moment decision to try transmitting, thus the coil in the shack.. Planning to put an 
ATU box up outside, and move it where it " should be " asap...

Andy - KU4XR
--------------------------------------------
On Sun, 3/18/18, jrusgrove at comcast.net <jrusgrove at comcast.net> wrote:

Andy
 
Didn't 
you once mention that your loading coil is in the shack? 
 
Jay W1VD

 



----- Original Message -----
From: Andy - KU4XR via 600MRG <600mrg at mailman.qth.net>
Reply-To: Andy - KU4XR <ku4xr at yahoo.com>
To: 600 meter group
<600mrg at mailman.qth.net>
Sent: 3/18/2018 2:03:03 PM
Subject: [600MRG] Don't scrimp on the shack grounding

______________________________________________________________
600MRG mailing list
Home: http://mailman.qth.net/mailman/listinfo/600mrg
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:600MRG at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/600mrg/attachments/20180318/c33c55c1/attachment.html>