[600MRG] IC-735 on 630 and 2200 meters.

[Kenneth G. Gordon]

On 26 Jan 2018 at 13:33, William E. Isakson wrote:

> 
> Ken, I read through the mod you suggested but I do not see why you need to make the receive 
> amp stay on.  It is true that under 1.5 MHz the receive amp turns off, but it comes back on again 
> when you move to under 500 KHz   I suppose it is good to know though, especially if you want to 
> dx the receive in the broadcast band, and it is possible you might want that, but for our purposes 
> here that mod is not necessary.  If you do the broadcast band receive mod, I would recommend a 
> switch in the wire so you can turn off (and on) that part of the mod at will.
> I will try the rest of your mods though.

Makes sense, Bill. In the TS-940SAT, though, the attenuation continies below the BC 
band....as I remember it.

BTW, these are NOT MY mods. They were dug up by a ham in Czechoslovakia.

Ken W7EKB

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus