[50mhz] Re: 50mhz Digest, Vol 51, Issue 5

[James M. Walker]

My 6 meter Kilowatt amp cost less than 200.00 when I put it
together, works fine, fully metered, TR-switching built-in.
ALL assembled from "GB" vintage equipment. General Electric,
Motorola and the like. Stands in place of pride in a 6 ft. rack.
http://eshop1.chem.buffalo.edu/6M-KW.html

Jim
WB2FCN


----- Original Message ----- 
From: "Cecil Acuff" <chacuff at cableone.net>
To: "jeremy-ca" <km1h at jeremy.mv.com>; "Peg Haese KB9LIE" <kb9lie at yahoo.com>; 
<50mhz at mailman.qth.net>
Sent: Wednesday, April 16, 2008 9:33 AM
Subject: Re: [50mhz] Re: 50mhz Digest, Vol 51, Issue 5


> 6M amps are no more or less expensive than HF amps.  Prices for HF amps 
> are all over the board depending on if you buy used, new...have the 
> ability to repair/restore etc.
>
> In the grand tradition of Ham Radio one should easily be able to pick up a 
> used SB-200 and perform the mods necessary to make a very nice 6M amp for 
> under $500...probably a lot less.  You need to have some technical ability 
> though...and not be an appliance operator.  One of the hallmarks of 
> Amateur Radio is the technical innovation that comes from it.  As a 
> Ham...new or old, we should work towards that end.
>
> Learn a technical skill and how to work with your hands on this stuff...
>
> Cecil
> K5DL
>
>
> ----- Original Message ----- 
> From: "jeremy-ca" <km1h at jeremy.mv.com>
> To: "Peg Haese KB9LIE" <kb9lie at yahoo.com>; <50mhz at mailman.qth.net>
> Sent: Wednesday, April 16, 2008 8:17 AM
> Subject: Re: [50mhz] Re: 50mhz Digest, Vol 51, Issue 5
>
>
>> Well, what some call affordable may not agree with anothers definition.
>>
>> Carl
>> KM1H
>> 6M Amp conversions since 1964
>>
>>
>> ----- Original Message ----- 
>> From: "Peg Haese KB9LIE" <kb9lie at yahoo.com>
>> To: <50mhz at mailman.qth.net>
>> Sent: Wednesday, April 16, 2008 7:28 AM
>> Subject: [50mhz] Re: 50mhz Digest, Vol 51, Issue 5
>>
>>
>>> Lance, I believe "affordable 6m amp" is an oxymoron. I sure haven't
>>> found any, either for my Alinco DX70TH (100w) or Ten-Tec 6N2 (20w).
>>>
>>> 73 de Peg KB9LIE in SW Wisconsin USA
>>>
>>> --- LANCE COLLISTER wrote:
>>>
>>> Since your announcement about the SB-200 for 6m, I have been asked by
>>> both XE2AT and CE3SAD to let them know of any affordable 6m amps that
>>> become available.
>>>
>>>
>>>
>>> ____________________________________________________________________________________
>>> Be a better friend, newshound, and
>>> know-it-all with Yahoo! Mobile.  Try it now. 
>>> http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>>> Moderator: Ray Brown, KB0STN
>>> _______________________________________________
>>> 50mhz mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/50mhz
>>> Help: http://mailman.qth.net/faq.htm
>>> Post: mailto:50mhz at mailman.qth.net
>>>
>>
>> Moderator: Ray Brown, KB0STN
>> _______________________________________________
>> 50mhz mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/50mhz
>> Help: http://mailman.qth.net/faq.htm
>> Post: mailto:50mhz at mailman.qth.net
>>
>
>
> Moderator: Ray Brown, KB0STN
> _______________________________________________
> 50mhz mailing list
> Home: http://mailman.qth.net/mailman/listinfo/50mhz
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:50mhz at mailman.qth.net
>
>
>