[50mhz] 6M rig recommendation

[Chris Boone]

The older FT620 or 625 (R or RD model) or a Kenwood TS6xx model (the
original 600 did not have all mode squelch but iirc the later models did);
would suggest preamp for some of them...Or  TS60 if you want to spend the
cash.

Chris
WB5ITT

> -----Original Message-----
> From: 50mhz-bounces at mailman.qth.net 
> [mailto:50mhz-bounces at mailman.qth.net] On Behalf Of Bill Aycock
> Sent: Saturday, November 25, 2006 9:04 PM
> To: 50mhz at mailman.qth.net
> Subject: [50mhz] 6M rig recommendation
> 
> Magic banders-
> I have a Yaesu FT-920 that does a good job on 6M (as well as 
> on the other bands), but I am wondering about the 
> availability of a Rig that is 6M only, all-mode, perhaps at a 
> lower power, that I can use as a dedicated, usually on, 
> Monitor. This would let me use the 920 for other things, 
> while listening for those infrequent, short-time, opportunities.
> 
> Do you know of any? Any advice welcomed.
> 
> Bill-W4BSG