[1000mp] RX Ant during TX

[k8gg at voyager.net]

Hello Csaba,

I believe you are correct.

However, I have always used a KD9SV front end protector relay accessory to
keep RX signals out of the transceiver when transmitting and listening on
a second antenna.

They are available from DX Engineering in Ohio, USA.  Originally this was
published in a magazine years ago.

It has a small high speed relay that opens or shorts to ground when the tx
ground contact is closed on any transceiver.

Good luck,  73,  George, K8GG






> Hi,
>
> Can you please confirm that in case when the MP goes for transmitting
> the RX input is disconnected by the RL1001 relay?
>
> I'm trying to trace this back on the schematic but kinda crowded.
>
> I would like to make sure I'm not going to burn the receiver if I use
> any RX antenna.
>
>
> Thanks in advance.
>
> 73!
> Csaba  HA3LN / HG3N
> http://ha3ln.hu/
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:1000mp at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>