[1000mp] Audio Sounds "Tinny"

[Bruno Tréguier]

Hi Bob,

What's the setting of your 4-4 menu (which is the transmit EDSP) ? It's 
one of the menus that can heavily impact your audio, so check that it 
isn't 1 or 2 at the moment. That might be the cause of your problem if 
it is.

Also, I know you tried 2 different mikes, but remember that under the 
MD-100 mike, there are 2 switches, 1 which is a low cut filter and 
another one turning on a "high emphasis". Be sure to check that as well.

Best regards,

Bruno - F8FIV

Le 29/10/2012 à 13:08, Bob Main a écrit :
> I was told by a local operator that I have no low frequencies in my audio
> that it sounds like I am talking through a CW filter and because of that no
> drive.  He said I had the RF signal, just not the audio that should go with
> it.  The radio has been in a box for almost 4 years what could have gone
> wrong on it, or do I have some switches in the wrong place?  I do have the
> MD-100 desk mike, but he said when I went to the hand mike that it was the
> same.  I did do a full reset of the radio so could something in there got
> undone that would have caused this?  I just remember there are some hidden
> (9-?) menu settings and I remember setting something on that way back when,
> but no clue what it was or what it got set to.
>
>
>
> Any ideas?
>
>
>
> Thanks and 73
>
> Bob
>
> KB4CL



-- 
- Service Hydrographique et Oceanographique de la Marine  -  DMGS/INF
-  13, rue du Chatellier -  CS 92803  - 29228 Brest Cedex 2, FRANCE
-     Phone: +33 2 98 22 17 49  -  Email: Bruno.Treguier at shom.fr