[1000mp] FT1000MP CW monitor

[Jim Smith]

Hi Sante

Perhaps I don't understand what you want or perhaps we're talking about 
different radios.

This is what I think you want.
Record audio of station you are listening to
Record audio of what you transmitted to the station (Monitor output)

Is this true?

If so, these are both available at the AF Out jack at the back of the 
FT-1000MP Mk V

I don't know if this is true for the 1000MP

Is your radio FT-1000MP or FT-1000MP Mk V?

73, Jim	VE7FO


Sante - IK0HBN wrote:
> Thank you Jim,
> but taking audio from AF OUT on the back of MP does not resolve the 
> problem of listening my own manipulation when on TX. As I record and 
> save all the contest audio, at the end I ear the station's, audio, 
> but could not ear myself, as monitor audio does not go to AF OUT but 
> only at headphone socket in the front of radio.
> Thanks again but I fear there are no shortcome to the problem, if not 
> modifying the hardware of the radio.
> Ciao
> Sante
> 
> 
> 
> At 02.17 10/03/2010, you wrote:
>> Sante
>> I run the VFO A and VFO B audio from the back of my Mk V into channels 1
>> and 2 of a 4 channel mixer.  I route the L and R outputs of the mixer
>> to, among other places, a headphone amp.  I hear the audio from VFO A in
>> my left ear and the Monitor output in my right ear (Mk V MONI button
>> "ON").  Both levels are independent of front panel control settings but
>> each one is controlled by the sliders on the mixer.  To hear both
>> outputs in both ears I flip the "MONO" switch on the mixer which
>> parallels the L & R outputs of the mixer.
>>
>> I don't know anything about the Soundblaster but it seems to me you
>> could accomplish the same with a couple of pots on the AF Out lines
>> feeding a simple resistive combiner to get everything onto one channel.
>>
>> 73, Jim Smith   VE7FO
>>
>> Sante - IK0HBN wrote:
>>> Hi all,
>>> I need to have cw monitor sound on AF OUT socket to record with
>>> Win-Test contesting activity. I could hear from AF OUT only the
>>> received signals, but not my manipulation. When on trasmitting the
>>> only recordered sound is the clicks of my keyer - probably due to
>>> some RF pick up.
>>> Any hint? I could use the phone socket in the front of radio to pick
>>> up both RX and TX signals, but it's annoying to have volume of radio
>>> locked always at same level so to avoid overriding sound blaster LINE-IN.
>>> Any modification to the radio to get both signals?
>>> TIA
>>> Sante
>>>
>>> ______________________________________________________________
>>> 1000mp mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/1000mp
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:1000mp at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>> ______________________________________________________________
>> 1000mp mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/1000mp
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:1000mp at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:1000mp at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>