[1000mp] If the FP-29 dies

[k9jwi]

Ed,

I use an Astron RS-35M for 13.8 vdc and
an Astron SLS-15 for 30 vdc for my Mark-V.
No other voltages are required.  Of course,
a different arrangement of power cabling
is necessary.
The SLS-15 is a 28 v/12.5a switching supply
but can be easily adjusted to 30 volts.
I have not noticed any switching noise from
the SLS-15.
I have run 200w RTTY with this arrangement.
It's a little undtidy but sure is cheaper
than the FP-29.

73, Clyde, K9JWI

Ed Hughes wrote:
> If my FP29 power supply for my FT1000MP MKV were to fail........ As I 
> understand, the 2 voltages supplied are 30 vdc & 13.8 (12vdc). Could I use a 
> combination of
> say an Astron 30vdc 18amp & my Astron 12vdc & put the MP back on line ? Or 
> is there some other voltages etc involved ?
> 
> Ed
> KG4W
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
> 
>