[1000mp] Mark V turn-on, power-up issue

[Glenn Rattmann]

To clarify what I wrote earlier:


>When it is 'bad'... if everything is switched OFF, and I press the 
>FP-29 switch, and I see the LED but don't hear the relay, or hear 
>the fan, then I know that pressing the power switch on the Mark V is 
>not going to do anything.

Pressing the power switch on the Mark V at that point does NOT switch 
the relays on the Mark V input board, because I don't hear them 
clicking.  You Mark V owners know what I mean, when you hit the power 
switch you normally hear additional clicking from internal relay(s), 
not just a simple click from the switch itself.
Again, this happens with either of my FP-29s, both of which run my 
other Mark V just fine.

--Glenn
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/1000mp/attachments/20090216/35dd0a5f/attachment.html