[1000mp] FT-1000MP problems pse help- correction

[alan p]

Dear Armin, sorry but I cannot duplicate your fault on my radio.  
----- Original Message ----- 
From: <zl1kmn at xtra.co.nz>
To: <1000mp at mailman.qth.net>
Sent: Sunday, September 16, 2007 4:14 PM
Subject: [1000mp] FT-1000MP problems pse help- correction


> Thanks for replay Alan,
> 
> 1. In AM mode, I cannot activate PROC. That's normal. I have full output
> in AM.
> 
> The transceiver works fine, without PROC switched ON. Have made some
> QSO's.
> Looks like, the PROC knob is not working, allways set to minimum. Loose
> connection?
> 
> 2. As I switched to AM and back to LSB, MONI started to work. I hear my
> sound fine. But, still, this deep tone is there, when MONI switched off,
> SSB or CW. In CW, when transmission starts, and even in SSB ( during the
> speak), with MONI switched off,I could hear some very distorsed deep
> sound, like a deep drum tone for one second. Its with internal speaker
> as well, but not loud. My headphone have a very good frequency response
> 12-39,000 Hz, so it's really very annoying.
> Like a deep drum tone. Could you please test this in your sytsem? Do you
> hear something similar? Its easy to test, go to CW and just press mic.
> When MONI is on, this drum is heard very shortly, after the pressing the
> button and before CW tone generated. Hard to descibe, sorry for it. Is
> it maybe a DC voltage?
> 
> Thanks for help,
> 
> Armin, ZL1KMN
> 
> 
>  
> 
> 
> 
> I've just become an owner of a nice FT-1000MP.
> 
> Unfortuntely I have two problems:
> 
> 1. When PROC activated, few milliwatts is the output, very little  I.C.
> Does not react for PROC knob rotation. Seems, that PROC is always on
> minimum. No problems when  the feature isn't used.
> 2. This one is very annoying:  When goes to transmit ( can be tested
> easily with CW and pressing the mic) , there is a strong deep sound in
> my headphones. It's like applying DC to the phone. Same sound can be
> heard in internal loudspeaker as well. Have tested with two headphones,
> same result. One was 300 Ohm , second one 36 ohms. Both have very good
> response for deep tones, so its allmost impossible to hear your CW
> transmit for a while..
> 
> One more idea:
> Btw, MONI knob and button does not have any effect as well. If I speak,
> I could hear some very distorsed deep sound, not readable at all.
> 
> No another problems, the rest of the transceiver works fine...
> 
> Have you experienced these problems?
> Any idea, how to fix it? 
> 
> Thanks,
> 
> Armin, ZL1KMN
> 
> 
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net