[1000mp] urgent help needed- reduced power on some bands

[ZL1KMN]

Thanks for help Hans,

I have it on SSb and CW as well. I am using external power meter.
But internal one seems to be correct. Reduced power = reduced Ic. 
Have tested with RTTY as well, 100w on 1.8, 3.5 50w on 7Mhz, 25W above.

Interesting, that my Tune ( in Remote jack) gives 25w on high bands, and
50w on 7 MHz and bellow. It should be 50w everywhere.

Armin

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net
[mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Hans Remeeus
Sent: 2007. október 27. 6:53
To: All about Yaesu 1000mp
Subject: Re: [1000mp] urgent help needed- reduced power on some bands


Hello Armin,

In which mode do you measure these outputs, besides SSB and CW?
With what kind of Powermeter do you measure?

Please test with the RTTY mode en hit MOX.

And use an external Powermeter for these kind of tests (with your 
dummyload).


73,
Hans Remeeus (PA1HR)
http://www.remeeus.eu
Communication is about people, the rest is technology.



zl1kmn at xtra.co.nz schreef:
> As he contest started, I found out, that there is a problem with my
> FT1000MP.
> 
> I have 100w output on 1.8 and 3.5 MHz, but only 50w or less on another
> bands. Tested with SSB and CW as well. The display shows 50w or less
as
> well.
> 
> It looks like this:
> 1.8 100w
> 3.5 100w
> 7	50w
> 10	40w
> 14	40w
> 18	25w
> 21	10w
> 24	25w
> 28	25w
> 
> In Menu 4-0 100w is shown. SWR is good ( tested with dummy load)
> 
> RF PWR is fully clockwise.
> 
> Any idea? . For me, looks like software problem. Have changed couple
of
> times to reduce the power on Menu 4-0, and then back to 100W, but no
> change.
> 
> Armin, ZL1KMN
> 
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net