[1000mp] urgent help needed- reduced power on some bands

[Hans Remeeus]

Hello Armin,

In which mode do you measure these outputs, besides SSB and CW?
With what kind of Powermeter do you measure?

Please test with the RTTY mode en hit MOX.

And use an external Powermeter for these kind of tests (with your 
dummyload).


73,
Hans Remeeus (PA1HR)
http://www.remeeus.eu
Communication is about people, the rest is technology.



zl1kmn at xtra.co.nz schreef:
> As he contest started, I found out, that there is a problem with my
> FT1000MP.
> 
> I have 100w output on 1.8 and 3.5 MHz, but only 50w or less on another
> bands. Tested with SSB and CW as well. The display shows 50w or less as
> well.
> 
> It looks like this:
> 1.8 100w
> 3.5 100w
> 7	50w
> 10	40w
> 14	40w
> 18	25w
> 21	10w
> 24	25w
> 28	25w
> 
> In Menu 4-0 100w is shown. SWR is good ( tested with dummy load)
> 
> RF PWR is fully clockwise.
> 
> Any idea? . For me, looks like software problem. Have changed couple of
> times to reduce the power on Menu 4-0, and then back to 100W, but no
> change.
> 
> Armin, ZL1KMN
>