[1000mp] re Loss of RX in Mark V

[leslie]

Hi all

I had a look inside the rig yesterday evening, I took out the local unit and
had a real good look over it checking for dry solider joints bad joints, and
just having a good look over. All seem ok I checked vco 1 for 8.5 v

And got 8.67 I adjusted for 8.5 I checked vco 2 vco 3 and 4 all with in
tolerance of 0.1 v of 8.5 v . I adjusted vr4001 for 1.65v where it was 1.67v
tolerance here being 0.05v + or - . I checked under rig around the filters 

Hear they felt a bit loose so I just pushed them back into place not much
movement these but they weren't snug and that was it I checked connections
and fired up the rig again at 9.30 last night and all seems nice and keen so
im still at a loss as to the intermittent no RX on main receiver. Maybe it's
a relay but how do I go about checking these when its intermittent. Thanks
for any advice here and also for all the replies that I have received. I
wish you all  a happy Christmas and a peaceful new year.

Leslie

EI5GJB