[1000mp] RE: Computer interface with the Field

[Neal]

It was the software - Logger 32 that was the problem. They have a drop down 
menu to configure the radiointerface and they used default 9600 and 1 stop 
bit, when in fact it should have been 4800 and the stop bit should be 2. 
Once I changed that it worked fine and connected

I found one other problem with the logging window. If you shut it down and 
then bring it back up, You lose the connection What I had to do in the 
logger 32 program was to close the port and then re-open it.

Strange program for sure, but it's free. I think I'll stick to my Win-EQF 
program, since no problems interfacing with it.

I have tried TRX manager and had no problems with it. That's surely strange.

Neal N4HAF
----- Original Message ----- 
From: "Tony Visco" <ahv73 at verizon.net>
To: <1000mp at mailman.qth.net>
Sent: Monday, May 15, 2006 7:34 AM
Subject: [1000mp] RE: Computer interface with the Field


> Neal,
> What issues did you find with the Yaesu's parameters'.  I have a Field 
> that
> will not talk to TRX Manager thru the serial ports of both the rig and
> computer.  My other rig from another manufacturer works just fine thru the
> serial port.
>
> Any other suggestions or details on the parameter issues.  It has been a
> couple of months since I attempted to work on this problem and had made
> numerous adjustments without success.
>
> Thanks in advance
>
> Tony W3EW
>
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net