[1000mp] Receive problem

[Dick White]

Uwe,
Thank you for the reply. I hope you read my post that the problem was
solved. I had accidentally turned off the ant selector so that no antenna
was selected for 20 meters. I just missed this fact when I was trying to
find out what was wrong.
Thank you for taking the time to reply.

73  Dick  KS0M

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net
[mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Uwe Egen
Sent: Tuesday, May 09, 2006 2:16 AM
To: 1000mp at mailman.qth.net
Subject: Re: [1000mp] Receive problem


Hi Dick
My first thinking is, in the past you switched to 20 on the second
input/output Ant A or Ant B. If you come back to 20 later on you set
up the radio to last configuration out of the memory. Suppose this is
the second antenna input/output. The LEDs show this situation.
Do not forget the second 20m memory position if you press the 20m
button again.
Hope this will be the reason and not a hardware failure.
73, Uwe, DL9NC



> Richard C. "Dick" White
> Fulton, MO. 65251  U.S.A.
> whiter26 at sbcglobal.net
>
> Amateur Radio Station - KS0M
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>
>


______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net