[1000mp] the FT1000MP

[W7HSG]

Hi all.

I have been remiss in reporting the fix to my RX/TX Problem DC to 7.5 Mhz

The problem was in the first VCO that covers DC to 7.499 mhz

I first tried alignment per the tech notes provided by both the web site and
the Tech notes from Yaesu.

No Go.

I read in the web site that some one resoldered the standard (non smt)
components.

I did that and also touched up one chip cap that the solder looked gray.

Problem solved.  MP 1000 works fine DC to 30 Mhz.,
'
I also replaced the solid wires from the 239 chassis mounts with stranded
wire per someones recommendation

Thanks to all for their input

Happy in Tucson

Ralph, W7HSG


Post: mailto:1000mp at mailman.qth.net