[1000mp] filtering for Rtty on a "Field"

[Mike Brown]

Sorry for the delay, I'm using FSK via the RTTY jack on the back.

73, Mike

Tom Homewood wrote:
> Are you using FSK or AFSK and are you running through the Packet input 
> if you are using AFSK?
> 
> 73, Tom, W1TO
> 
> 
> ----- Original Message ----- From: "Mike Brown" <k9mi at sbcglobal.net>
> To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
> Sent: Sunday, July 23, 2006 11:27 AM
> Subject: [1000mp] filtering for Rtty on a "Field"
> 
> 
>> I have a question about filtering my FT1000 MP Field for Rtty. Since 
>> they come with a 500 hz filter already in the second IF, I put in the 
>> 500 hz filter in the third IF, and also the Inrad roofing filter at 
>> the same time. This really works well on CW.
>>
>> My question is, last weekend in the Naqp Rtty, this really worked 
>> well. But I ran into a problem. I was transmitting 20 hertz higher 
>> then my receive frequency. No problem once I was made aware of this, 
>> and set my rit at -.020, that put me back in transceive and all was 
>> well. Did this have something to do with the way the rig is now 
>> filtered, or have I got a setting wrong in the software (MMTTY engine 
>> in WriteLog). Thanks...
>>
>> 73, Mike K9MI
>>
>>
>>
>> ______________________________________________________________
>> 1000mp mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/1000mp
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:1000mp at mailman.qth.net
>>
> 
> 
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
> 
>