[1000mp] filtering for Rtty on a "Field"

[Tom Homewood]

Are you using FSK or AFSK and are you running through the Packet input if 
you are using AFSK?

73, Tom, W1TO


----- Original Message ----- 
From: "Mike Brown" <k9mi at sbcglobal.net>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Sunday, July 23, 2006 11:27 AM
Subject: [1000mp] filtering for Rtty on a "Field"


>I have a question about filtering my FT1000 MP Field for Rtty. Since they 
>come with a 500 hz filter already in the second IF, I put in the 500 hz 
>filter in the third IF, and also the Inrad roofing filter at the same time. 
>This really works well on CW.
>
> My question is, last weekend in the Naqp Rtty, this really worked well. 
> But I ran into a problem. I was transmitting 20 hertz higher then my 
> receive frequency. No problem once I was made aware of this, and set my 
> rit at -.020, that put me back in transceive and all was well. Did this 
> have something to do with the way the rig is now filtered, or have I got a 
> setting wrong in the software (MMTTY engine in WriteLog). Thanks...
>
> 73, Mike K9MI
>
>
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>