[1000mp] Re: 1000mp Digest, Vol 21, Issue 31

[Thomas Tow]

Thanks Dennis, I will give that a try. If I recall I have no lines into any
of the mic jacks other than required audio and ptt with the grounds. I will
check inside those shells to make sure..Thanks,  Tommy WD4K

-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
On Behalf Of Dennis
Sent: Tuesday, January 31, 2006 4:43 AM
To: 1000mp at mailman.qth.net
Subject: [1000mp] Re: 1000mp Digest, Vol 21, Issue 31

Tommy

Try unplugging the microphone.  If it stops scanning, you have a short 
of some kind on the +5V line at the mike jack.

Dennis NB1B


> ---------
>
>  
>
> From: Thomas Tow [mailto:ttow1 at charter.net] 
> Sent: Monday, January 30, 2006 10:34 AM
> To: 1000mp-request at mailman.qth.net
> Subject: MP Scanning
>
>  
>
> Very odd occurrence..when any of the contour buttons are selected, if you
> hit the NB button, the radio immediately goes into a downward scan...if
you
> turn contour off..the scanning stops. Anyone seen this before, it there
> something hidden in the menus somewhere. I have had three MP's since 1996
> and this is the first really unexplainable occurrence I have found that I
> cannot figure out.  BTW it is a Mk 5.
>
>        
> Thanks, Tommy WD4K
>
>
>
> ------------------------------
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>
>
> End of 1000mp Digest, Vol 21, Issue 31
> **************************************
>
>   
______________________________________________________________
1000mp mailing list
Home: http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net