[1000mp] RTTY question

[Joe Subich]

The Yaesu radios use FSK in RTTY mode.  You must provide an
interface (usually a transistor and resistor) between the TxD
line of the computer FSK port and the FSK input of the RTTY
jack (DIN-4).

73,

    ... Joe, W4TV




> -----Original Message-----
> From: 1000mp-bounces at mailman.qth.net
> [mailto:1000mp-bounces at mailman.qth.net] On Behalf Of Lance
> Sent: Monday, January 02, 2006 8:23 PM
> To: All about Yaesu 1000mp
> Subject: Re: [1000mp] RTTY question
>
>
> I have a similar problem.  Have my 1000MP with the
> Rigblaster and
> have been trying to get MMTTY to run it.
> Everything seems to work,
> but when I listen to the frequency on another rig,
> all I hear is carrier.
> No tones.  I've set the "project" aside for a
> while and will get back to
> it later.  I would, also, appreciate any advice.
> 73, WN0L
>
>
> ----- Original Message -----
> From: <N9NUN at aol.com>
> To: <1000mp at mailman.qth.net>
> Sent: Monday, January 02, 2006 7:09 PM
> Subject: [1000mp] RTTY question
>
>
> I'm trying to setup my Mark V with Rigblaster Pro
> and Writelog and have an
> issue with keying the radio to transmit RTTY.  It
> seems when I have the  radio
> in USB it works fine but once I switch the radio
> over to the RTTY  mode it
> only transmits a carrier.  I'm sure I'm missing a
> setting  somewhere.  I have the
> rig talking to the computer on com port 4 (USB)and
> the Rigblaster running on
> com 1. I tried using MMtty program along with the
> MixW  program and had the
> same results.  Any help on this would be
> appreciated.  Just wondering if
> anyone else would happen to be running the  same
> setup that I could compare mine
> to.
>
> Thank you,
> Mike
>
> __________________________________________________
> ____________
> 1000mp mailing list
> Home:
> http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>
>