[1000mp] RTTY question

[Lance]

I have a similar problem.  Have my 1000MP with the
Rigblaster and
have been trying to get MMTTY to run it.
Everything seems to work,
but when I listen to the frequency on another rig,
all I hear is carrier.
No tones.  I've set the "project" aside for a
while and will get back to
it later.  I would, also, appreciate any advice.
73, WN0L


----- Original Message ----- 
From: <N9NUN at aol.com>
To: <1000mp at mailman.qth.net>
Sent: Monday, January 02, 2006 7:09 PM
Subject: [1000mp] RTTY question


I'm trying to setup my Mark V with Rigblaster Pro
and Writelog and have an
issue with keying the radio to transmit RTTY.  It
seems when I have the  radio
in USB it works fine but once I switch the radio
over to the RTTY  mode it
only transmits a carrier.  I'm sure I'm missing a
setting  somewhere.  I have the
rig talking to the computer on com port 4 (USB)and
the Rigblaster running on
com 1. I tried using MMtty program along with the
MixW  program and had the
same results.  Any help on this would be
appreciated.  Just wondering if
anyone else would happen to be running the  same
setup that I could compare mine
to.

Thank you,
Mike

__________________________________________________
____________
1000mp mailing list
Home:
http://mailman.qth.net/mailman/listinfo/1000mp
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:1000mp at mailman.qth.net