[1000mp] FT1000MP and FL7000

[Sam Ferris]

Ted:  I have this exact setup.  It works fine.  There is an interface cable 
thgat has to be purchased to go between the 1000mp and the FL7000 to enable 
automatic band tracking of the amp to the radio but that is about it.  The 
amp should come with the ALC cable (at least mine did.  The number o fthe 
interface cable that came from Yaesu for this was E-767 - it is the same one 
used to interface the amp to an FT767, FT-990, FT100(D) or a few other 
radios.

I don't use the setup much other than for RTTY contesting.  Use the MP at 
low power to drive 100 W out of teh amp because of the key down effect of 
the RTTY use.  A couple of muffin fans on top of the amp keeps it all cool.

Hope this helps

Sam
VE5SF




----- Original Message ----- 
From: "Ted Boerkamp" <tboerkamp at cogeco.ca>
To: "1000mp Reflector" <1000mp at mailman.qth.net>
Sent: Friday, December 01, 2006 5:36 PM
Subject: [1000mp] FT1000MP and FL7000


> Hello One and All,
> I am just wondering if anyone is using a 1000MP
> original model with a FL7000 hf amp?? I have the chance to purchase this 
> amp
> and I just want to know if there are any special requirements for pairing
> these two pieces of gear together. Does anyone have any feedback on how 
> well
> they work together??? Any comments are most welcome.
> Thanks
>
> 73  Ted VE3SS
>
> ______________________________________________________________
> 1000mp mailing list
> Home: http://mailman.qth.net/mailman/listinfo/1000mp
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:1000mp at mailman.qth.net
>