[1000mp] roofong filter and menu 9.1

[Mike Schatzberg]

Hello Hans:

Does your Field have the noise blanker mod?

Thanks for the info.

73,

Mike
WB2AJI
----- Original Message ----- 
From: "Hans Remeeus" <hans at remeeus.nl>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>; <sv1dpi at raag.org>
Sent: Monday, January 24, 2005 4:24 PM
Subject: Re: [1000mp] roofong filter and menu 9.1


> Hello Kostas,
>
> Ti kanis? Kala?
>
> When you decrease the value of menu 9-1 the S/N-ratio will improve, but...
> there will be a noticable distortion when receiving very strong signals.
>
> I did a lot of tests with my Field, particularly on 3,6 MHz, and
decreasing
> the value of 9-1 from 14 (my default setting) to 13, 12, 11 and 10 will
> result in more and more distortion with really strong signals.
>
> Just try it yourself.
>
> Perhaps it's better to use the ATTenuator to get a more pleasant
S/N-ratio.
>
> Giacharah-sas.
>
>
> 73,
> Hans Remeeus (PA1HR)
> http://www.remeeus.nl
> Communication is about people, the rest is technology.
>
>
> ---- Original Message ----
> From: "Kostas SV1DPI" <sv1dpi at raag.org>
> To: <1000mp at mailman.qth.net>
> Sent: Sunday, January 23, 2005 10:27 PM
> Subject: [1000mp] roofong filter and menu 9.1
>
> > I added the roofing filter in my MARK V.
> >    Does it need to decrease this value?
> >    I read in inrad manual that i need to increase if i had IF mode =
> >    installed (i didn't).
> >    I had the impression reading the emails here that i must decrease
> >    it. I noticed that s-meter is wrong now (without decreasing the
> >    9.1 menu) Confused.....
> >    Kostas SV1DPI
> >
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
>