[1000mp] ft1000mp mk5 filters died

[n3drk]

I would just do a reset. Make sure you know all your menu settings and then
do the reset.
73's
john


----- Original Message ----- 
From: "PAUL ASH" <BLUESDUDE at CFL.RR.COM>
To: <1000mp at mailman.qth.net>
Sent: Monday, January 03, 2005 8:54 PM
Subject: [1000mp] ft1000mp mk5 filters died


> Hello All,
>
> While using my FT-1000mp MK5 this evening on
> 40m CW, all of the sudden both of the NAR1 and NAR2
> bandwith filters cut out. Basically no audio out of the
> rig at all. NOR mode works fine. In SSB mode, all of the
> filters seem to work although it almost seems like the
> 2nd and 3rd IF filters are too sharp.
>
> The rig is loaded with the following filters:
>
> All INRAD:
> 708-B, 709-B, 702-C, 704-C, 721-C
>
> I tried resetting the micro but that didn't help.
> I currently have menu options set as follows:
>
> 5-0 off
> 5-1 on
> 5-2 8.2-455
> 5-3 on
> 5-5 on
> 5-6 on
> 5-7 on
>
> (this was after resetting the micro - I did not originally
> set up the radio.)
>
> Any ideas what could be going on?
>
> Thanks and 73,
>
> Paul W4QG
>
>
>
>
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
>