[1000mp] 1.8 KHz filters in CW position

[Doug McCann]

Hi Jeff
Have a look at this link on my page:
http://www.va3cr.net/settings%20and%20troubleshooting/SSB%20Filters%20in%20C
W%20Slots.html

Also, you can go the main page (see below) and type in "filters" in the
Google Search Engine and you find a wealth of info on this subject.

Enjoy

Doug McCann, VA3CR
www.va3cr.net

 
-----Original Message-----
From: 1000mp-bounces at mailman.qth.net [mailto:1000mp-bounces at mailman.qth.net]
On Behalf Of Jeff Goldman
Sent: Sunday, November 07, 2004 2:50 PM
To: 1000mp at mailman.qth.net
Subject: [1000mp] 1.8 KHz filters in CW position

Is it possible in the FT-1000MP to use the 2.0 filters (in both 8.2 and 
455 IF's) in the normal 2.0 KHz positions, AND to put 1.8 KHz filters  
(again in both IF's) in the 250 Hz slots and to program the radio to 
give the option of 2.0 or 1.8 filters while in SSB?  Since I am not 
enough of a CW buff, I would like to leave the 250 Hz filters out and 
use the filter positions for the 1.8 KHz filters.

Thanks for your help from a relatively new 1000MP owner.

73,
Jeff, K3DUA

_______________________________________________
1000mp mailing list
1000mp at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/1000mp