[1000mp] Af Out & Monitoring Transmitted Audio

Mon, 8 Mar 2004 17:24:59 -0000

Mark,

Thanks for the quick response.   Btw, I initially hit the "reply" button
ahead of entering any text so you may get a spurious email from me prior to
this.

Just one question - currently I use the "af out" to connect straight to the
"line in" on my soundcard so could I use pin 2 on the 7 pin DIN socket
instead?   Or are there likely to be issues with this as I also use the "af
out" for PSK and MMTTY?   Is it a constant level, or variable?

In fact I use 2 x FT1000MPs in SO2R operation for contests so would need to
(say) take  a feed from pin 2 of each DIN socket into  "line-out" connector.

Would this be OK ?

73

Steve
GW4BLE

----- Original Message ----- 
From: "Mark Marsden" <[email protected]>
To: <[email protected]>; <[email protected]>
Sent: Monday, March 08, 2004 5:12 PM
Subject: Re: [1000mp] Af Out & Monitoring Transmitted Audio

Hi Steve

The DVS2 connector has Tx & Rx audio available on pin 2 of the 7 pin DIN
socket - it's used for recording off-air and microphone audio.
See http://granta.digital-crocus.com/Voice_Keyer.php3 for details on a voice
keyer using the DVS2 interface.

73 Mark G4AXX

>>> [email protected] 08/03/04 16:41:55 >>>
Anyone know if the "af out" socket on the rear of the 1000MP carries
transmitted audio too - or if not, is there any way to record both received
*and* transmitted audio from a SINGLE feed?

I need to be able to record both my own voice (i.e. "moni" switched on) and
received audio to disc.

It *appears* that the "af out" is a fixed level, received signal ONLY, but I
am not really sure  (yes, I know a lead attached to a headphone plugged into
the jack would confirm, but if some has "been-there-done-that" it would save
some time).

Please post any replies direct to the reflector, just in case anyone else
has a similar query.

Thanks

Steve
GW4BLE