[1000mp] Yaesu MD-100a8x Microphone.

[William Diamond]

Hi Bob,

Oh, OK, thanks, I just never thought of that. Some years ago, KW designed
their desk mike so that you could unplug the rig cord from the base and
connect directly to the mike head for hand held operation. You had to be
careful because you could put the connector on the mike end two different
ways, one for Hi z and the other way for Lo z

           WILLIAM J. DIAMOND
          ROGERS, ARKANSAS USA

        HAM RADIO OPERATOR WRØT
 VISIT MY NEW RADIO ROOM REVISED 7-04, AT
           www.wjdiamond.com

       DIGITAL PHOTOGRAPHY SITE IS AT
http://pages.sbcglobal.net/wjdiamond/index.html


-----Original Message-----
From: 1000mp-bounces at mailman.qth.net
[mailto:1000mp-bounces at mailman.qth.net]On Behalf Of Bob Beck
Sent: Sunday, August 29, 2004 10:23 PM
To: All about Yaesu 1000mp
Subject: Re: [1000mp] Yaesu MD-100a8x Microphone.


Hi William,

It can be done, the flexible cable with the 8 pin and RJ45 connector  plugs
into the mic and the cable which is permanently connected to the mic base
with the 8 pin plug plugs into the radio. The problem was, the mic would
still work but not the scan feature hi hi.
I would have thought that having the flexible cable would be better coming
from the mic rather than the stand so you could separate the mic from the
base giving you more flexibility to operate.


Best Regards,

Bob VK4CPM



----- Original Message -----
From: "William Diamond" <wjdiamond at sbcglobal.net>
To: "All about Yaesu 1000mp" <1000mp at mailman.qth.net>
Sent: Monday, August 30, 2004 11:44 AM
Subject: RE: [1000mp] Yaesu MD-100a8x Microphone.


> Hi Folks,
>
> I guess I am missing something.. I have several of these mikes and I sure
> cannot figure out how one could be hooked up wrong.
>
> 8 Pin cable to back of mike and then the cable with the RJ45 and the 8 pin
> to the rig..  I am not being a smart A--. I just can't see how it can be
> done.
>
>           WILLIAM J. DIAMOND
>          ROGERS, ARKANSAS USA
>
>        HAM RADIO OPERATOR WROT
> VISIT MY NEW RADIO ROOM REVISED 7-04, AT
>           www.wjdiamond.com
>
>       DIGITAL PHOTOGRAPHY SITE IS AT
> http://pages.sbcglobal.net/wjdiamond/index.html
>
>
> -----Original Message-----
> From: 1000mp-bounces at mailman.qth.net
> [mailto:1000mp-bounces at mailman.qth.net]On Behalf Of W4ABW at aol.com
> Sent: Sunday, August 29, 2004 8:59 AM
> To: 1000mp at mailman.qth.net
> Subject: Re: [1000mp] Yaesu MD-100a8x Microphone.
>
>
> Also, it won't scan if you have the cables hooked between the mic and the
> MP
> backwards. Took me by surprise when I first hooked mine up wrong.
>
> Al
> W4ABW
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
> _______________________________________________
> 1000mp mailing list
> 1000mp at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/1000mp
>
> __________ NOD32 1.852 (20040828) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.nod32.com
>
>

_______________________________________________
1000mp mailing list
1000mp at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/1000mp