[1000mp] Mark V with Ameritron Amp

[1000mp@mailman.qth.net]

Hello John,

This is what I found on the Alpha Power site for connection to the
FT-1000MP/MkV/D:

Pins 2 (+ Keying), 3 (Gnd), and 8 of BAND DATA connector can be used for
QSK keying of Alpha 87A, 89, 99, and 91B amps (Pin 8 is connected to Gnd).
Turn LIN SW off.
Connect cable to RELAY jack of Alpha amplifier.


I hope this is of any help to you.

73, Hans Remeeus.
Ham Radio: PA1HR
www.remeeus.nl

Communication is about people, the rest is technology.


----- Original Message -----
From: "n3drk" <n3drk@triad.rr.com>
To: <1000mp@mailman.qth.net>
Sent: Thursday, October 23, 2003 5:50 PM
Subject: [1000mp] Mark V with Ameritron Amp


> I have an Ameritron AL-811 Amp and need to know what I have to do to
> interface the two. The amp has 3 cables coming out to be attached to the
> rig. An alc, relay, and a ptt. There is no relay plug on the back of the
> mark v so what goes to get this up and running?
> Thanks
> john
>