[1000mp] New MARK-V
Vidi & Hester
[email protected]
Sun, 16 Mar 2003 22:09:53 +0200
Hi Dennis
I am also a newcomer to FT-1000 and have a MP since Dec last. Interesting
to note that you have or had a TS-2000. How does the MARK-V compare to the
2000on receive - - - especially weak signals ? I am a 99% CW operator and
must say the MP is great. I also have a TS-930 which is a very fine rig,
but it lacks the refinement of the MP especially the second RX is
unbelievable.
73
Vidi, ZS1EL
----- Original Message -----
From: "Dennis" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 16, 2003 4:10 PM
Subject: Re: [1000mp] New MARK-V
> Hi Tom,
>
> Yes the VOX is "ELEMENTARY" and that's the first thing I should have
> done....but I didn't.....DUH. All is fine with the VOX depressed and I'm
a
> bit RED in the face. My TS-2000 would automatically go to VOX in the CW
> mode and I just didn't think of it with the MARK-5. Sorry for the post
and
> waste of your time, mostly new rig jitters I think.
>
> Thanks and best 73,
>
> Dennis AB8NI
>
> ----- Original Message -----
> From: "Thomas Worthy" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, March 16, 2003 8:33 AM
> Subject: Re: [1000mp] New MARK-V
>
>
> >
> >
> >
> >
> >
> >
> >
> > Dennis,
> >
> >
> >
> > Do you have the VOX button depressed? This sounds elementary but, we
have
> > to start somewhere.
> >
> >
> >
> > Tom
> >
> >
> >
> > Dennis wrote:
> >
> >
> > Me again Tom,
> >
> > My MARK-V won't key (in CW) unless I have the "BK-IN" button pressed. I
> get
> > the CW side tone but the rig does not key. Any ideas?
> >
> > Thanks,
> >
> > Dennis AB8NI
> >
> >
> > ----- Original Message -----
> > From: "Thomas Worthy" <[email protected]>
> > To: <[email protected]>
> > Sent: Saturday, March 15, 2003 6:28 PM
> > Subject: Re: [1000mp] New MARK-V
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Dennis,
> >
> >
> >
> > It sounds like you are having a lot of fun. The one that you want is
7-5.
> > You just have to delay it a little.
> >
> >
> > I also installed the INRAD filters and they work great.
> >
> >
> >
> > Keep me posted as to how you like it when you get it set up.
> >
> >
> >
> > Tom
> >
> >
> >
> > Dennis wrote:
> >
> >
> > Hi Tom,
> >
> > Thanks for the reply and I think I found the menu (7-5) Keyer Delay Time
> >
> >
> > but
> >
> >
> > see there is also one named Keyer Break-in Time (7-4). I'll be
> pulling
> >
> >
> > the
> >
> >
> > rig out tomorrow to install the new INRAD filters that just came so
> I'll
> > hook up the 1500 after that and play with the delay.
> >
> > Thanks again and best 73,
> >
> > Dennis AB8NI
> >
> >
> > ----- Original Message -----
> > From: "Thomas Worthy" <[email protected]>
> > To: <[email protected]>
> > Sent: Saturday, March 15, 2003 3:17 PM
> > Subject: Re: [1000mp] New MARK-V
> >
> >
> >
> >
> > Dennis,
> >
> > You will probably have to set the keying delay. It is not long enough
> > to keep the 1500 keyed. You will find it in the menu. If you have any
> > trouble finding it, let me know.
> >
> > Tom
> >
> > Thomas Worthy wrote:
> >
> >
> >
> > Dennis,
> >
> > I have a 1500 and Mark V and that is all that I did.
> >
> > Tom, W7YW
> >
> > Dennis wrote:
> >
> >
> >
> > Hello gang,
> >
> > I just received my new MARK-V and I'm a bit confused about hooking up
> > my Ameritron AL-1500 amp. Can I just turn on the "LIN" switch and go
> > from the "TX GND" jack to the AL-1500? The AL-1500 relay jack is
> > rated 12V DC 100ma when pulled to ground.
> >
> > Thanks,
> >
> > Dennis AB8NI
> >
> > --- StripMime Report -- processed MIME parts ---
> > multipart/alternative
> > text/plain (text body -- kept)
> > text/html
> > The reason this message is shown is because the post was in HTML
> > or had an attachment. Attachments are not allowed. To learn how
> > to post in Plain-Text go to: http://www.expita.com/nomime.html ---
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
> >
> >
> >
> >
> >
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
> >
> >
> >
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
> >
> >
> >
> >
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > text/html (html body -- converted)
> > The reason this message is shown is because the post was in HTML
> > or had an attachment. Attachments are not allowed. To learn how
> > to post in Plain-Text go to: http://www.expita.com/nomime.html ---
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
> >
> >
> >
> >
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --- StripMime Report -- processed MIME parts ---
> > text/html (html body -- converted)
> > The reason this message is shown is because the post was in HTML
> > or had an attachment. Attachments are not allowed. To learn how
> > to post in Plain-Text go to: http://www.expita.com/nomime.html ---
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp