[1000mp] New MARK-V

Sun, 16 Mar 2003 09:10:20 -0500

Hi Tom,

Yes the VOX is "ELEMENTARY" and that's the first thing I should have
done....but I didn't.....DUH.  All is fine with the VOX depressed and I'm a
bit RED in the face.  My TS-2000 would automatically go to VOX in the CW
mode and I just didn't think of it with the MARK-5.  Sorry for the post and
waste of your time, mostly new rig jitters I think.

Thanks and best 73,

Dennis  AB8NI

----- Original Message -----
From: "Thomas Worthy" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 16, 2003 8:33 AM
Subject: Re: [1000mp] New MARK-V

>
>
>
>
>
>
>
> Dennis,
>
>
>
> Do you have the VOX button depressed?  This sounds elementary but, we have
> to start somewhere.
>
>
>
> Tom
>
>
>
> Dennis wrote:
>
>
>   Me again Tom,
>
> My MARK-V won't key (in CW) unless I have the "BK-IN" button pressed. I
get
> the CW side tone but the rig does not key.  Any ideas?
>
> Thanks,
>
> Dennis  AB8NI
>
>
> ----- Original Message -----
> From: "Thomas Worthy" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, March 15, 2003 6:28 PM
> Subject: Re: [1000mp] New MARK-V
>
>
>
>
>
>
>
>
>
>
> Dennis,
>
>
>
> It sounds like you are having a lot of fun.  The one that you want is 7-5.
>  You just have to delay it a little.
>
>
> I also installed the INRAD filters and they work great.
>
>
>
> Keep me posted as to how you like it when you get it set up.
>
>
>
> Tom
>
>
>
> Dennis wrote:
>
>
>   Hi Tom,
>
> Thanks for the reply and I think I found the menu (7-5) Keyer Delay Time
>
>
>   but
>
>
>     see there is also one named Keyer Break-in Time (7-4).  I'll be
pulling
>
>
>   the
>
>
>     rig out tomorrow to install the new INRAD filters that just came so
I'll
> hook up the 1500 after that and play with the delay.
>
> Thanks again and best 73,
>
> Dennis AB8NI
>
>
> ----- Original Message -----
> From: "Thomas Worthy" <[email protected]>
> To: <[email protected]>
> Sent: Saturday, March 15, 2003 3:17 PM
> Subject: Re: [1000mp] New MARK-V
>
>
>
>
>     Dennis,
>
> You will probably have to set the keying delay.  It is not long enough
> to keep the 1500 keyed.  You will find it in the menu. If you have any
> trouble finding it, let me know.
>
> Tom
>
> Thomas Worthy wrote:
>
>
>
>       Dennis,
>
> I have a 1500 and Mark V and that is all that I did.
>
> Tom, W7YW
>
> Dennis wrote:
>
>
>
>         Hello gang,
>
> I just received my new MARK-V and I'm a bit confused about hooking up
> my Ameritron AL-1500 amp.  Can I just turn on the "LIN" switch and go
> from the "TX GND" jack to the AL-1500?  The AL-1500 relay jack is
> rated 12V DC 100ma when pulled to ground.
>
> Thanks,
>
> Dennis  AB8NI
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>  text/plain (text body -- kept)
>  text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
>
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
>
>
>
>
>
>
> --- StripMime Report -- processed MIME parts ---
> text/html (html body -- converted)
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
>
>
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>
>
>
>
>
>
>
> --- StripMime Report -- processed MIME parts ---
> text/html (html body -- converted)
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp
>