[1000mp] New MARK-V

Sun, 16 Mar 2003 06:33:41 -0700

Dennis,

Do you have the VOX button depressed?  This sounds elementary but, we have
to start somewhere.

Tom

Dennis wrote:

  Me again Tom,

My MARK-V won't key (in CW) unless I have the "BK-IN" button pressed. I get
the CW side tone but the rig does not key.  Any ideas?

Thanks,

Dennis  AB8NI

----- Original Message -----
From: "Thomas Worthy" <[email protected]>
To: <[email protected]>
Sent: Saturday, March 15, 2003 6:28 PM
Subject: Re: [1000mp] New MARK-V

Dennis,

It sounds like you are having a lot of fun.  The one that you want is 7-5.
 You just have to delay it a little.

I also installed the INRAD filters and they work great.

Keep me posted as to how you like it when you get it set up.

Tom

Dennis wrote:

  Hi Tom,

Thanks for the reply and I think I found the menu (7-5) Keyer Delay Time

  but

    see there is also one named Keyer Break-in Time (7-4).  I'll be pulling

  the

    rig out tomorrow to install the new INRAD filters that just came so I'll
hook up the 1500 after that and play with the delay.

Thanks again and best 73,

Dennis AB8NI

----- Original Message -----
From: "Thomas Worthy" <[email protected]>
To: <[email protected]>
Sent: Saturday, March 15, 2003 3:17 PM
Subject: Re: [1000mp] New MARK-V

    Dennis,

You will probably have to set the keying delay.  It is not long enough
to keep the 1500 keyed.  You will find it in the menu. If you have any
trouble finding it, let me know.

Tom

Thomas Worthy wrote:

      Dennis,

I have a 1500 and Mark V and that is all that I did.

Tom, W7YW

Dennis wrote:

        Hello gang,

I just received my new MARK-V and I'm a bit confused about hooking up
my Ameritron AL-1500 amp.  Can I just turn on the "LIN" switch and go
from the "TX GND" jack to the AL-1500?  The AL-1500 relay jack is
rated 12V DC 100ma when pulled to ground.

Thanks,

Dennis  AB8NI

--- StripMime Report -- processed MIME parts ---
multipart/alternative
 text/plain (text body -- kept)
 text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp

_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp

_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp

_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp

--- StripMime Report -- processed MIME parts ---
text/html (html body -- converted)
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp

_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp

--- StripMime Report -- processed MIME parts ---
text/html (html body -- converted)
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---