[1000mp] Ten-Tec Orion - Initial Impressions

Joe Giacobello [email protected]
Thu, 19 Jun 2003 13:58:49 -0400


Thanks, Earl.  You have saved me a lot of upset.  I just sold my backup 
850S to partly offset the cost of a new Orion.  I think I'll just sit 
tight for a while.


73, JOe

[email protected] wrote:

>Hi, Joe,
>
>You wrote:
>
>"Earl, this was wonderfully thorough review, and I am most appreciative."
>----------
>Perhaps my review was premature.  Afterwards I A/B switched the Orion
>with my FT-1000MP to see how it compared on digging weak CW signals out
>of the noise.  There was no comparison -- the MP won easily.  Because to
>this and other dislikes I have about the Orion, I returned it to Ten-Tec
>for  refund.
>
>Other dislikes I had were:
>
>1) Audio whine in the headphone output, very noticeable in narrow CW BWs.
>
>2) Poor implementation of AGC action on CW.
>
>3) NR not effective at all on CW.
>
>4) Poor ergonomics - too many button presses and knob twirling needed
>when you want to change something during the normal course of operation.
>==========
>
>"Did TenTec finally windup using a B&W screen or did they add some
>color?"
>----------
>No color.  The LCD display is strictly B&W.
>==========
>
>"Sounds like that IF DSP is really doing the job."
>----------
>I was mistaken in my original assessment of the NR on CW.  I have not
>been able to duplicate the way it seemed to work on CW initially.  In
>fact, the NR does absolutely nothing on CW when the bandwidth is narrowed
>down.
>==========
>
>"Are the optional filters really necessary?"
>----------
>For the serious CW operator, I would recommend the 500 Hz filter. 
>There's little noticeable difference between that and the 250 Hz filter
>when you're using 100 Hz DSP bandwidth.
>
>73, de Earl, K6SE
>_______________________________________________
>List Moderator: Richard Lubash N1VXW
>1000mp mailing list
>[email protected]
>To Change Options or Unsubscribe:
>http://mailman.qth.net/mailman/listinfo/1000mp
>
>
>  
>