AW: [1000mp] MKV menu item 7-7 question?

Wed, 2 Apr 2003 10:28:35 +0200

> -----Urspr=FCngliche Nachricht-----
> Von: [email protected]
[mailto:[email protected]] Im
> Auftrag von D.Delucca
> Gesendet: Dienstag, 1. April 2003 23:44
> An: [email protected]
> Betreff: [1000mp] MKV menu item 7-7 question?
>=20
> I have a MKV with the final menu items
> enabled/configured as follows:
>=20
> 1. 4-4 / off
> 2. 5-9 / 6.0
> 3. 7-7 / 100hz - 3100hz ( on both xmitt and rec.)
>=20
> With the above settings, menu item 8-9 settings have
> no effect on the xmitt or rec audio. If I turn the
> processor on I can hear a difference in the transmit
> audio if I vary the TX LSB or TX USB settings (not the
> the Proc LSB settings but the TX LSB or TX USB
> settings). If I turn menu item 7-7 to off, then 8-9
> settings do have an effect on xmitt and rec. Is this
> operating correctly? I have done
> several "all power re-sets" of the microprocessor just
> in case. Tnx for your help ..Dario/N5QVF
>=20

Thats absolut correct.

I am using the MD-100 with my MKV and get the
Best results with the following settings:
MD-100 Filter selection all off and switch to "thru".

MKV Menu Settings:
1. 4-4 ON!
2. 5-9 6.0
3. 7-7 200-3100 (for local 40m/80m) for DX OFF!
4. 8-9 Proc usb/lsb carrier -0.150 (for 40/80) -0.100 for DX!

Always leave the processor on an adjust it for 40/80 only around
11'clock
(just find the point where the processors kicks in...not more)
And for DX processor on maxium.

Thats it.

I am using my MKV since over 2 years and get absolut great audio
reports.
Depending on your natural voice the seetings may vary a little bit.

Good luck and hope to meet you on the air!

Mark
DL1EIO