[1000mp] Display Dies Again

Doug McCann VA3CR [email protected]
Mon, 2 Sep 2002 07:42:27 -0400


Hi Tony and Mike...
The fix is on my web site at a slightly different address:
http://www.va3cr.net/settings%20and%20troubleshooting/display%20problems
.html
Look for "DISPLAY PROBLEMS" on this page.
I did some housekeeping over the weekend.

Doug McCann, VA3CR
http://www.va3cr.net


-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Michael Gilmer
Sent: Sunday, September 01, 2002 10:14 PM
To: [email protected]
Cc: [email protected]
Subject: Re: [1000mp] Display Dies Again




> The display on my rig went dead again on August 31, 2002.  Any 
> suggestions
on how to repair this problem before I return the rig a second time to
Yaesu?
>
> I remember reading a previous thread in this discussion group about
bypassing the display's thermal fuse to fix this problem.  Is this a
good idea?  Any details?  Other suggested fixes?

I posted that "fix" which is now up on VA3CR's terrific MP site.

http://www.va3cr.net/settings%20and%20troubleshooting/display%20problems
.htm
l

It's only a "semi-good" idea and only if the fuse is bad (obviously).
So, check the fuse first. It takes no more than 15 minutes to get to it
even if you've never taken the radio apart (assuming you are so inclined
to open up the MP yourself)

If it's bad, bypass it and you can see the display come back to life.
What you do then is up to you!

If/when I find a suitable replacement, I'll be sure to post the info.

73 Mike N2MG


_______________________________________________
List Moderator: Richard Lubash N1VXW
1000mp mailing list
[email protected]
To Change Options or Unsubscribe:
http://mailman.qth.net/mailman/listinfo/1000mp