[1000mp] Addition of SSB Filters in Solved

[1000mp@mailman.qth.net]

I have posted several requests for information about adding additional SSB 
filters in the CW IF positions and did not receive any responses.

While in Dayton, I stopped by the Yaesu booth and talked with Chip and was 
assured that I could add 1.8 filters in the 250 CW positions and it would 
only affect the RX and not the TX because all transmit is via the 2.4 filters.

I then went to the INRAD booth and saw George and purchased a pair of 1.8 
filters.

Upon my return home I installed the 1.8 filters in the 250 slots. So that I 
now have a pair of 2.4 filters in the 2.4 slots, a pair od 2.0 filters in the 
2.0 slots and a pair of 1.8 filters in the 250 slots. The flexibility is 
terrific and the ability to cascade the filters or use any combination is 
great.

73,
George K3GV

DX: Long may it live !
If it isn't LOGic it isn't LOGging !