[1000mp] AM mode MP settings

Sun, 31 Mar 2002 13:04:41 -0600

Hi Bill, W9NHQ

We exchanged emails this past winter regarding a make of Amplifier 
and as a result of your input I changed direction and happy that I 
did, thanks.

As for the MP/MKV I wonder if you know which filter the processor 
uses, is it the 8.2 2.4 or the 455 2.4?  I traced out the transmit 
path from the service manual block diagram and it looks like it goes 
into the 455 but I'm really not sure.  If I'm not mistaken (again) 
the FT-1000 uses the 8.2 2.4.

Dale
K9VUJ

>
>
>Menu 5-9 selects the roofing filter when EDSP is controlling SSB
>transmit bandwidth.  The 6 kHz setting is the factory default and allows
>EDSP transmit bandwidths up to 3 kHz - and no greater.  The 2.4 kHz
>filter is automatically selected for non-EDSP SSB transmit and whenever
>the speech processor is enabled, regardless of the menu 5-9 setting.
>There is no way to transmit 6 kHz wide SSB with an unmodified, stock MP.
>
>73,
>
>Bill, W9NHQ
>_______________________________________________
>List Moderator: Richard Lubash N1VXW
>1000mp mailing list
>[email protected]
>To Change Options or Unsubscribe:
>http://mailman.qth.net/mailman/listinfo/1000mp