[1000mp] Can't adjust FT1000mp vox delay

Tue, 1 Jan 2002 01:21:13 -0500

Bill:

Check menu item 7-5 "Keyer Delay". 

Default is 0; I have mine set to 0.36 seconds.

 Jeff Maass       [email protected]     Located near Columbus Ohio
         USPSA # L-1192       NROI/CRO    Amateur Radio K8ND
    Maass' IPSC Resources Page:  http://home.columbus.rr.com/jmaass
Circleville USPSA/IPSC: http://home.columbus.rr.com/jmaass/pcsiipsc.htm

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of William Hein, AA6TT
> Sent: Monday, December 31, 2001 8:33 PM
> To: [email protected]
> Subject: [1000mp] Can't adjust FT1000mp vox delay
> 
> 
> I purchased a FT1000mp years ago just I had to take a break from 
> ham radio due to work commitments.  Sat in the box for several 
> years and just yesterday pulled out and set up.
> 
> I cannot get the VOX Delay adjusted.  No matter where I set the 
> DLAY pot on the ALC unit, the rig seems to be in full break-in 
> mode.  And, yes, I made sure the BRK-IN switch is off.
> 
> My FT1000mp is the DC version, serial no. 5F010078, with all the 
> Yaesu accessory filters and TCXO-6 installed.  I also installed 
> the IR background noise & AGC mods and cut the J68808 Line 2 wire 
> for transverter operation per the manual (the rig is intended to 
> be used as a full-time 6m IF).
> 
> Suggestions?  Hate to send in for repair a rig I haven't even used yet!
> 
> 73 & HNY,
> Bill AA6TT
> 
> ------------------------------
> William H. Hein, AA6TT
> 10 Clark Road
> Topsham VT 05076-3086 USA
> tel 802/584-4317
> -------------------------------
> http://www.AA6TT.com
> email [email protected]
> MSN IM [email protected]
> -------------------------------
> _______________________________________________
> 1000mp mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/1000mp
> 