[1000mp] help connecting soundcard input.

[Morris Wideman]

If you use the patch connector you will have to disconnect the mic from the front connector as it shorts out the mic in line when not keyed. Ive used digital modes on my MP and before it a FT102. Good luck and 73
Morris 
--

On Sun, 18 Aug 2002 06:38:29  
 on4vp wrote:
>Hello,
>
>I'm new to the reflector and recently got me a secondhand 1999 FT1000MP.
>I'm qiet impressed with all the info to find over the internet, been reading
>a lot.
>
>One thing seems not to work for now, to hook up a line from my soundcard to
>work some afsk digital modes like PSK31 or SSTV.
>
>I would like to keep the mic on the front 8 pins connector and I like to
>hear about possible suggestions. I for now have the afsk line from the
>soundcard on the patch rca input and the PTT trough the 7 pins DVS input.
>
>Wath did NOT work : afsk via voice in or packet in on both connectors, this
>was strange to me.
>So folks, all help is welcome and thanks a million.
>
>PS, I have a rigblaster but only with RJ45 and therefore work not trought
>the 8 pin connector on the front.
>
>73, Philippe
>ON4VP
>www.2die4.be
>
>
>
>_______________________________________________
>List Moderator: Richard Lubash N1VXW
>1000mp mailing list
>1000mp@mailman.qth.net
>To Change Options or Unsubscribe:
>http://mailman.qth.net/mailman/listinfo/1000mp
>


__________________________________________________________
Outgrown your current e-mail service? Get a 25MB Inbox, POP3 Access,
No Ads and No Taglines with LYCOS MAIL PLUS.
http://login.mail.lycos.com/brandPage.shtml?pageId=plus