[1000mp] 10 meters

Tue, 16 Apr 2002 11:04:09 -0500

Teemu, thank you, you are right I checked the radio more closely and I
have lost everything above 21.999mhz. So now I know what to do and that
is take it up the the Ham store which is abt 100 miles away. thank you
very much cuz now I have a better description of the trouble for them.

The very best
Ole

Teemu S Korhonen wrote:
> 
> Hi Ole
> 
> You have trouble with your 4th VCO, we have had the same problem on 15 and
> 17 meters, if you check closely you see that the problem extends further
> than just 10 meters covering a lagre frequency portion (the one of VCO4),
> probably you can solve the problem by exchanging the driving cirquit for
> your vco (what we did), this is pretty stikky because its a large SMD
> cirquit to remove.
> 
> Anyhow start by testing the VCO if you are lucky you only need to ajust the
> VCO by trimming it from inside your radio, you should get a service
> complement for your Radio so you won't mess up anything else, there is a
> section in that about checking the right VCO values!
> 
> Good luck!
> 
> /Teemu SM0WKA // SM0W
> www.sm0wka.com
> 
> ----- Original Message -----
> From: "R L Johnson" <[email protected]>
> To: "1000MP" <[email protected]>
> Sent: Monday, April 15, 2002 11:54 PM
> Subject: [1000mp] 10 meters
> 
> > question to the group, My 1000MP just recently went dead on 10 meters
> > cannot recieve or xmitt and the display is ok. but on the B reciever
> > I can hear the signals
> > any thought to what might be wrong
> >
> > Thank you
> > Ole N0ABE
> > _______________________________________________
> > List Moderator: Richard Lubash N1VXW
> > 1000mp mailing list
> > [email protected]
> > To Change Options or Unsubscribe:
> > http://mailman.qth.net/mailman/listinfo/1000mp
> >
> 
> _______________________________________________
> List Moderator: Richard Lubash N1VXW
> 1000mp mailing list
> [email protected]
> To Change Options or Unsubscribe:
> http://mailman.qth.net/mailman/listinfo/1000mp